Mooer Macro Power S12

Iniciar 360°

Mostrar tradução

Multi-Power Supply for Effects Units

Maximum total current output: 3,400 mA
Two toroidal transformers and advanced filter technology for clean power with no noise
12 Completely independent, galvanically isolated outputs for 2.5 mm x 5.5 mm barrel connector with centre negative
1x Adjustable voltage (9V, 12V, 15V, 18V) with 300 mA output
2x Independent 9V each with 600 mA loadable
3x Independently 9V each with 300 mA loadable
6x Independent 9V with 200 mA each loadable
IEC AC input
Selectable input voltage (110V ~ 120V and 220V ~ 240V) for use in different regions
Status LED for each output
Overvoltage protection function
Dimensions (L x W x H) 225 x 88 x 5 mm
Weight: 1.82 kg
Includes power supply cable (6x 460 mm, 6x 610 mm), polarity reversal cable (1x 200 mm, red plugs), Power supply cable and hook and loop tape

Aviso Register your purchase at shop.warwick.de/en/warranty-registration for an extended warranty of 4 years.

30 dias dinheiro de volta

Thomann garantie de 3 anos

Disponível desde Junho 2018

número de artigo 440144

unidade de venda 1 peça(s)

DC/AC current DC

Output current in mA 3400 mA

9 V Yes

12 V Yes

18 V Yes

Secondary voltage Yes

Multi-output power supply Yes

€ 157

IVA incluído, € 9,90 de portes de envio adicionais

Entrega aprox. entre Sexta, 14.03. e Segunda, 17.03.

128

Posição de vendas

em Transformadores

68 Avaliações de clientes

5 52 Clientes 4 13 Clientes 3 2 Clientes 2 0 Clientes 1 1 Cliente

4.7 / 5

acabamento

Diretrizes de apreciações

43 Críticas

Very good, reliable, silent but a bit heavy

zédobass 13.04.2023

I was very satisfied with the power supply. Lots of different mA options, very silent and super solid (seems built like a tank). It's just a bit heavy and large, so it might put extra weight on your pedalboard and might not fit under smaller ones.

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

No more noise

Terrains 21.12.2020

My pedalboard is silent (in a good way) since upgrading to this power supply. No more noisy pedals. It's a solid and reliable power supply, which is all you really want.

It's chunky, so might not fit under every board, and it's heavy - but I find that reassuring... If you trod on it somehow I think the only damage would be to your foot. The kettle plug connector is also handy, you always have a spare power lead to hand. Good range of inputs and always useful to have a variable voltage input.

The only negative is there's no kind of mounting bracket for this power supply that I can find.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

The last power supply you'll ever need (maybe)!

freakinpete 27.09.2018

I bought this power supply to replace a smaller capacity supply that was starting to give problems - I added an EHX Oceans Eleven to my board and it pushed the Harley Benton Powerplant over the edge. This supply is excellent - it has isolated outputs to support even the most demanding pedal, and one adjustable voltage output, so should be flexible enough to support most boards.
This supply is slightly bigger and heavier than the Harley Benton Powerplant, and it lacks an actual on/off button. I still managed to fit it under my board, and it's working great. I don't think I will ever need to replace or upgrade this power supply.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

It’s broken…!!!

B.Col 25.07.2024

I bought this product 4 years ago… and now it’s broken.. one should bear in mind that this is not cheap and I would expect it to last a lot longer than 4 years.. so what happened ?
It’s been sitting under my pedal board doing its duty, completely protected and mounted securely using Velcro and cable ties. The socket where the kettle lead plugs in is clearly visible and was easy to connect. However the power began to cut out, which is not exactly great during a gig. But fiddling with the mains cable a bit would bring it back to life, but only for a while and the problem would continue. So in short it’s now pretty useless.
I contacted Mooer via email and asked them if they could fix it… they sadly did not respond to my mail…
So I decided to have a look myself.. I thought maybe there’s a lose wire ?? But no, the socket appears to be mounted directly onto a circuit board and I’m not messing with that. In my view it seems not a good idea to have something that is pushed every time you plug the mains in to be mounted in this way.
Anyway I’m not happy, it’s an inbuilt fault just waiting to happen..
My advice would be to buy something else… I’m going to buy the Harley Benton power plant ISO 2 Pro to replace it… I’ve already been using one of these for several years and it’s been faultless…

Reportar a crítica

Ler todas as reviews

Mooer Macro Power S12

Multi-Power Supply for Effects Units

Fonte de alimentação múltipla para unidades de efeitos

68 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

43 Críticas

Navegador inteligente

Servido com amor!

Mooer Macro Power S12

Multi-Power Supply for Effects Units

Fonte de alimentação múltipla para unidades de efeitos

Acessórios e artigos correspondentes

68 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

43 Críticas

Comparar opções

Navegador inteligente