Para o conteúdo da página
🥁 Até 70% de desconto: Ofertas de Páscoa mais doces que chocolate! Compre agora

Gotoh SD90-SL MG-T Locking 3L/3R N

80

Locking Machine Head Set for Electric Guitar

  • Vintage G-Style
  • Gotoh MG-T traditional locking system with a knurled screw on the back of the machine head
  • Configuration: 3 Left / 3 right
  • Semi-closed construction
  • Buttons: Pearloid Keystone Single Ring
  • Gear ratio: 1:15
  • Shaft length (to string hole): 19.5 mm
  • Bore: 8.8 mm
  • Attachment: Screw
  • Screw tab angle: 90°, 180°
  • Surface finish: Nickel
  • Includes fastening screws and push-in sleeves
  • Made in Japan
Disponível desde Maio 2020
número de artigo 476664
unidade de venda 1 peça(s)
Colour Nickel
Locking Yes
Design Vintage
€ 69
Todos os preços incl. IVA
Disponível em 8-10 semanas
Disponível em 8-10 semanas

É previsível que este artigo entre brevemente e stock e o despacho poderá ser feito de imediato.

Informações sobre o envio
1

80 Avaliações de clientes

4.8 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

55 Críticas

e
Good b
edo1 21.11.2021
They don't fit Gibson Les Pauls 2020 and to Gibson SG special, because and the holes are of a different diameter (bigger), so you have to use an adapter. On the Harley Benton Les Paul there is the opposite problem: the holes are too small and so you have to drill them.
Once arrived two tuners didn't work, but luckily Thomann service is top notch and so they changed them with new and working ones.
The plastic tulipans are more greenish than original Gibson ones, for this reason I prefer the Schaller tuners.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
k
kenorsarn 01.05.2021
They look wonderful, direct replacement for PRS SE Paul's guitars and SE guitars with vintage style tuners in general (no drill needed). Stays in tune perfectly. 100% would recomend
acabamento
7
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
K
Attention PRS SE 594 owners
Kokkaya 09.06.2024
This is not a drop in replacement for 594 Mccarty SE tuners. The ferrules are a little bit (1mm) wider than the stock ones. So you have to “force” your way in. If you know what you’re doing, you’re good to go. Screws align perfectly and once the tuners are in properly, they work like a charm. Gotoh makes good quality parts.
Many thanks Thomann for quick delivery.
acabamento
4
1
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
P
Great locking tuners
Paul84 17.03.2021
Bought these to fit a 2014 Gibson R9 as they looked similar to the stock tuners while also being locking. Also fitted a set to my 2007 Gibson R6 as I liked them so much.
Straight swap on Gibson historics and alot of other custom shops with the smaller diameter holes. Older USA line Gibsons might also have the smaller holes, but newer USA line Gibsons usually have a larger hole.

Feels great and very precise.
acabamento
3
0
Reportar a crítica

Reportar a crítica