Fun Generation CL 105 A Stand Adaptor

Iniciar 360°

Mostrar tradução

Stand Adapter

Adapter for microphone stand (3/8") to the flange on the bottom of the Fun Generation CL 105 A (art. 437402)
Also suitable for Mackie SRM 150 (Art.252346), Behringer B105D (Art.477976) and Behringer B205D (Art.248038)

30 dias dinheiro de volta

Disponível desde Agosto 2020

número de artigo 486820

unidade de venda 1 peça(s)

Type Tripod Sleeve

€ 2,99

Todos os preços incl. IVA

106

Posição de vendas

em Acessórios para suportes

Eis o que compraram os clientes que visualizaram este artigo

65%

comprado

Este artigo exatamente

K&M 216 Thread Adapter

€ 3,90

comprado

Millenium Thread Adapter 3

€ 0,99

67 Avaliações de clientes

5 16 Clientes 4 11 Clientes 3 6 Clientes 2 4 Clientes 1 30 Clientes

2.7 / 5

acabamento

Diretrizes de apreciações

46 Críticas

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Rubbish

Grayoid 05.11.2021

The product is designed wrong. In the bottom there is a metal thread that is glued into plastic. When you tighten the item onto your stand the thread is not deep enough and causes the metal insert to become loose. My monitor smashed on the floor and broke. This is a terrible item don't buy it.

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Poor Quality

JamesBy 05.08.2022

The metal push fit section of the adaptor is not secure - first time I mounted the monitor, the plastic section separated from the screw thread and the monitor fell off. I bought 2 of these - both the same. It's quite soft plastic so it will only get worse. Putting the two parts back together just weakens the connection and shreds the plastic inner grooves meaning each refit is loose than the previous one. This product is not fit for purpose. The Mackie version is a higher quality and solid as a rock. Unfortunately they're hard to get hold of. Behringer used to include this adaptor WITH the monitor but now you have to source from a third party seller. Not good.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Dreadful - but can be improved !

Tony Roberts 10.05.2023

I'm a fan of Thomann, but the design and construction of this piece is frankly ridiculous ! As others have pointed out, the 5/8 female threaded ring is just lightly pressed into the plastic part, so it pulls out easily - potentially causing your beloved personal monitor to crash to the floor. There's also nowhere near enough thread.

However, alternatives are hard to come by, so for a bit of effort it can be improved. I used a 5/8-F to 1/4-M adaptor and extended this with a piece of 6mm brass tubing, reamed out to 1/4-20 and screwed tightly to the adaptor (with thread-lock). I then pressed this piece into the plastic part, packing this first with epoxy so it won't pull out.

Ridiculous to have to do this, but I think it will hold !

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

A hint for a fix

MSUB 14.12.2024

As probably anyone else, I also broke the thing on first use, fortunately without damage to the box, which was expected to be held by this adapter.
I have got a replacement, which broke down as well instantly.
Then I tried to glue the metallic ring in, following advice found here in reviews. Did not last long anyway, and I had the metallic ring with a thread separated from the plastic again.
At the end, I drilled three 3.5mm diameter holes through the plastic approx. 4.5 mm out of the edge, placed evenly across the circumference by 120 degrees, and used three 6mm long M4 setting screws with sharp tip to screw through these holes towards deepening in the middle of a metallic ring. Screws shall be fastened just enough to hold the ring, and to avoid its deformation, which would result in damage to a circular shape and inability to screw it on the stand.
So far it holds well. In case of doubt, I would just drill three more holes shifted by 60 degrees and three more setting screws to assure even better hold.

Reportar a crítica

Ler todas as reviews

Fun Generation CL 105 A Stand Adaptor

Stand Adapter

Adaptador de suporte

Eis o que compraram os clientes que visualizaram este artigo

67 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

46 Críticas

Navegador inteligente

Servido com amor!

Fun Generation CL 105 A Stand Adaptor

Stand Adapter

Adaptador de suporte

Eis o que compraram os clientes que visualizaram este artigo

Acessórios e artigos correspondentes

67 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

46 Críticas

Comparar opções

Navegador inteligente