Thomann Case Behringer Xenyx 2442

375

Iniciar 360°

Mostrar tradução

Case

Suitable for Behringer XENYX 2442/USB
1 Handle
Accessory compartment
Foam padding
Interior dimensions (W x D x H): 510 x 430 x 130 mm
Height of lower part: 130 mm
Height top part: 10 mm
Outer dimensions (W x D x H): 530 x 620 x 200 mm
Weight: 5.15 kg
Colour: Black

30 dias dinheiro de volta

Thomann garantie de 3 anos

Disponível desde Novembro 2010

número de artigo 251046

unidade de venda 1 peça(s)

made for Behringer

Type Case

Material PVC/Aluminium

Wheels No

Dockhouse No

Inner width 510 mm

Inner depth 430 mm

Inner height 130 mm

Colour Black/Alu

Weight 5,1 kg

External Width 530 mm

External Depth 620 mm

External Height 200 mm

Mostrar mais

€ 85

IVA incluído, € 9,90 de portes de envio adicionais

Entrega aprox. entre Terça, 18.03. e Quarta, 19.03.

Posição de vendas

em Cases para mesas de mistura

Eis o que compraram os clientes que visualizaram este artigo

56%

comprado

Este artigo exatamente

€ 85

comprado

Thomann Bag Behringer Xenyx X2442 USB

€ 49

comprado

Thomann Case Yamaha MG 16

€ 85

comprado

Thomann Case Behringer Xenyx 2222

€ 77

comprado

Thomann Mix Case 5462X

€ 99

375 Avaliações de clientes

5 267 Clientes 4 83 Clientes 3 20 Clientes 2 3 Clientes 1 2 Clientes

4.6 / 5

estabilidade

manuseio

acabamento

Diretrizes de apreciações

130 Críticas

It does it's job, but come on

José Meira 11.09.2020

I was hoping something a little more well done from thomann... It does it's job, it's really sturdy, your mixer will not get damaged with the usual normal to kinda rough handling, but the pads (luckily the ones that are just filling the box and not there to provide much protection) were all detached from the case. I use it to take my xenyx 2442 usb to gigs and rehearsals and it works fine. Overall it's a good case, just hoped thomann would be more careful.

Reportar a crítica

Acredita que esta classificação seja por alguma razão imprecisa ou incaceitável? Indique-nos por favor a justificação na caixa de texto em baixo e se possível o seu endereço de email para eventuais questões.

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Not the most hardy case around but does the job

Connor Josef 03.03.2022

Don't expect a really rugged flightcase, this is more suited for light transport. I use a Xenyx 2442 mixer as a back up mixer in case my digital one goes down, so I just keep it in this flightcase in the van for if I ever need it. I wouldn't use this for daily hauling in an out of the van, unless you're very gentle with your gear. But for the price, it's good value and will keep your mixer safe

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

Solid case

howardjworf@aol.com 26.12.2022

I bought this to protect my 2442 in transit (obviously). It’s a very substantial well padded box that does the job. There is decent sized storage space at the rear in which I keep the power lead and two 15m Pro Snake XLR cables to run to the speakers, and with the mixer in the box there is also some storage space available underneath for odd small items. I keep a bluetooth adaptor and some short connecting cables there.
Just three things to note. Firstly the foam pad at the front is a little too thick and stops the mixer from sitting flush on the side supports on its 19 inch rack rails. Secondly there is no access to the rear of the mixer with it in the case but it is best to remove the mixer anyway to avoid it overheating. Thirdly the lid is on fixed hinges, so I take the mixer out and put on the box when in use.
To conclude, I am happy with the case, and can recommend it as a useful purchase to take good care of your 2442 mixer. With the weight of the case and the mixer you'll get a good workout.

Reportar a crítica

Mostrar tradução

Mostrar original

Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.

good case for occasional use

Howard T. 29.10.2017

I bought this for protecting a 16 channel (2442) behringer mixer that I have in stock, mainly as a back up. the intent was to protect it while it was moved occasionally and while on the shelf. to that end, the case is fine - i's not however robust and you shouldn't confuse it with a proper flight case. If what you want is occasional use and protection then this is the case...if you want something heavy duty to take reeated bashing then you need to look for something else at a higher price pint, the panels are not as substantial as standard ply or astroboard and the catches are easy to mis align and no where near as robust as a butterfly catch - but then one needs to remember that this case is half the cost. for occasional use or careful repeated use it's fine.

Reportar a crítica

Ler todas as reviews

Thomann Case Behringer Xenyx 2442

Case

Caso

Eis o que compraram os clientes que visualizaram este artigo

375 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

130 Críticas

Navegador inteligente

Servido com amor!

Thomann Case Behringer Xenyx 2442

Case

Caso

Eis o que compraram os clientes que visualizaram este artigo

Acessórios e artigos correspondentes

375 Avaliações de clientes

Terá de iniciar sessão para classificar produtos.

130 Críticas

Comparar opções

Navegador inteligente