Para o conteúdo da página

JTS MA-123

71

Switchable attenuator for microphones

  • -10 dB, -20 dB and -30 dB switchable
  • Suitable for dynamic microphones and condenser microphones
  • XLR in / out
  • Frequency range: 22 - 20,000 Hz
  • Dimensions: 21 x 113 mm
  • Robust metal housing
Disponível desde Abril 2018
número de artigo 436200
unidade de venda 1 peça(s)
€ 24,90
IVA incluído, € 9,90 de portes de envio adicionais
Em stock
Em stock

Este produto encontra-se em stock e pode ser enviado imediatamente.

Informações sobre o envio
Entrega aprox. entre Segunda, 31.03. e Terça, 1.04.
1

71 Avaliações de clientes

4.7 / 5

Terá de iniciar sessão para classificar produtos.

Nota: De forma a prevenir que as classificações sejam baseadas em boatos, conhecimento limitado ou má publicidade nós apenas permitimos classificações provenientes de clientes no nosso website, que tenham adquirido o equipamento através de nós.

Após iniciar sessão poderá encontrar todos os produtos que poderá classificar em classificar produtos no centro de clientes.

acabamento

47 Críticas

p
Atenuador sem distorção
pooispoois 17.02.2019
Este atenuador serve o propósito, a um preço muito mais baixo e justificado que a competição (ex. o A15AS da Shure, cujo preço é incompreensível para algo que é na essência um conjunto de resistores).

Para quem esteja com dúvida, efetuei o teste e confirmo que permite a passagem de phantom power.

Não chega às cinco estrelas apenas porque o interruptor que seleciona a atenuação não parece particularmente robusto, o encaixe não é igualmente sólido para todas as posições.
acabamento
0
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
r
Recommended with Tannoy 5 Gold monitors and Babyface Pro
roccapl 28.11.2020
I had the problem that the output of my RME Babyface Pro (the old model) has a fixed output that drives the Tannoy Gold 5 monitors too hot.
The result of this is that the main output of the sound card had to stay at -40dB, lowering the resolution of the audio and pumping the self noise. In the rme forums ("Level mismatch solutions - fixed and variable attenuators"), they suggested this product and I admit that they work perfectly to attenuate the sound card output so that I can turn my main output back to 0dB.
acabamento
6
0
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
MV
Really useful to connect to a power amp
Melmoth Valkenstein 24.11.2024
I am using this attenuator in my hifi setup at home, the reason being that I connect a streamer (Wiim Pro Plus) directly to a power amp. Since the former has only digital attenuation it sometimes messes up with the volume (especially when I use Air Play) and sends full signal to the power amp. After reading online about these attenuators I decided to purchase a couple of them and tried them connected to the power amp. They do not introduce any kind of noise nor do they alter the signal in any way that I can subjectively perceive. Also, they do their job: Even when I crank up the volume to insane levels it remains within the boundaries of an SPL that doesn't damage my speakers and hearing.
acabamento
0
1
Reportar a crítica

Reportar a crítica

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
AD
The cheapest and gets the job done
Alex Djuran 31.03.2021
I bought a few of these for some loud sources I'm dealing with in my studio such as my subkick, LDC overheads, SDC's on close mic'd drums etc. The sources are very hot, so I needed some pads to not clip my mics in digital and this little thing caught my eye.

It's way cheaper than most of the competition and it's pretty versitile in offering you 3 steps of padding. Overall, great product!
acabamento
1
0
Reportar a crítica

Reportar a crítica