Para o conteúdo da página
compare-box

Eurolite Raylight PAR-64, E-27

9

Refletor para Carcaça PAR 64

  • Para inserir lâmpadas E-27 ou lâmpadas LED E-27
  • 230 V CA, 50 Hz
  • Máx. 500W
  • Comprimento do cabo: 0,95 m
  • Profundidade: 12,5 cm
  • Diâmetro: Ø 20,3 cm
Disponível desde Setembro 2020
número de artigo 503541
unidade de venda 1 peça(s)
Type Of Accessory Reflector
Type Base
€ 20,90
IVA incluído, € 9,90 de portes de envio adicionais
Em stock
Entrega aprox. entre Quinta, 27.03. e Sexta, 28.03.
1

9 Avaliações de clientes

4.3 / 5
Avaliar agora

acabamento

8 Críticas

google translate gb
Infelizmente ocorreu um erro. Por favor tente novamente mais tarde.
M
Easy to fit
Mark8610 25.05.2022
I bought two of these to convert two polished long nose PAR64 cans into profile spots for a very small stage using LED filament lamps. Fitting was really easy. They are provided earthed, so the old earthing could be dispensed with. There is room between reflector and grill for quite large bulbs but the focus of the reflector is quite far back, so I have used golfball LED filament bulbs. Other bulbs I tried had the light source too far forward to be captured by the reflector and reflected forward. A Powercon fitted on the end of the cable without any further stripping or modification.
I bought two of these to convert two polished long nose PAR64 cans into profile spots for a very small stage using LED filament lamps. Fitting was really easy. They are provided earthed, so the old earthing could be dispensed with. There is room between reflector and grill for quite large bulbs but the focus of the reflector is quite far back, so I have used golfball
I bought two of these to convert two polished long nose PAR64 cans into profile spots for a very small stage using LED filament lamps. Fitting was really easy. They are provided earthed, so the old earthing could be dispensed with. There is room between reflector and grill for quite large bulbs but the focus of the reflector is quite far back, so I have used golfball LED filament bulbs. Other bulbs I tried had the light source too far forward to be captured by the reflector and reflected forward. A Powercon fitted on the end of the cable without any further stripping or modification.
acabamento
1
0
Reportar a crítica

Reportar a crítica