This echo pedal, inspired by the tape Echoplex, has a beautiful sound and includes a built-in preamp simulation. But this is where I had a problem.
After reading the manual, I thought I needed the preamp in my signal chain, so I switched to buffered mode. But after testing six different boosters and overdrives, something still didn’t sound right. So, I removed the Belle Epoch from my signal chain—and suddenly, the sound was much closer to a natural tube amp tone, with rich harmonics and warm mids. The Belle Epoch’s preamp made the sound a bit “transistor-like.”
I switched to true bypass mode, closed the pedal, and the sound was great. But when I turned the effect on, the volume dropped a lot. So, I opened the pedal again and adjusted the gain trimmer. The volume increased, but when it finally matched the bypass level, the preamp started to distort too much.
Maybe the issue is my amp or effects loop, but in true bypass mode, I couldn’t get the same volume without losing sound quality. In buffered mode, the sound wasn’t as good and had harsh highs and strange feedback.
After a few days, I had to return the Belle Epoch. Now I’m going to try the Dunlop Echoplex. It’s a shame because the Belle Epoch is well-built and looks great. If I could change one thing, I’d move the gain trimmer to the top as a sixth knob. Also, a small toggle switch on the pedal for selecting bypass modes would be much more convenient. I don’t like opening the pedal just to adjust settings.